![](https://static.youtibao.com/asksite/comm/h5/images/m_q_title.png)
Termination loopback in software loopback of PTN equipment means signal loopback to i
![](https://static.youtibao.com/asksite/comm/h5/images/solist_ts.png)
A.terms and conditions
B.termination and conditioning
C.term and condition
D.terminations and conditionings
A.所有接口中最小的IP地址
B.所有接口中最大的IP地址
C.Loopback接口中最小的IP地址
D.Loopback接口中最大的IP地址
A.自适应(Auto)
B.业务恢复定时(Customer)
C.系统时钟(System)
D.环回时钟(loopback)
A. Two adjacent ports of a link on 10GE ring belong to one VLAN domain and one IP network section.
B.All PTN devices should be enabled with service loopback address as NE ID in service forwarding plane. This loopback must be unique globally.
C.Service encapsulation VLAN ID is in range of 17~3000 and it is suggested to start from 101
D.VLAN IDs of nonadjacent link segments can be the same
A.49.0001.1920.1680.1001.00
B.86.0001.0192.0168.1001.00
C.49.0001.1921.6800.1001.00
D.86.0010.1921.6810.0001.00
A.10GE环每条链路相邻两端口属于同一VLAN域、同一IP网段
B.所有PTN设备都需要启用业务LOOPBACK地址作为业务转发层面的网元标识,此LOOPBACK必须全局唯一
C.业务封装VLANID的范围在17~3000,建议从101开始使用
D.不相邻链路段VLANID可以相同